Particle monitors precisely display any change in contamination of in particle system. Thus you can react quickly with ain particle
High pressure-concentration and countermeasures can be taken.
Subsequent damages are minimized and costs are reduced.
The particle monitor is designed for operating with pressures of up to 420 bar (6090 psi). Thus it can directly be mounted to a pressure line.
The particle monitor is equipped with an intensely illuminated graphic display and a keypad by which you may set up all required adjustments. The menu navigation is made up intuitively and logically.
Wide Communication Possibilities:
The particle monitor exports data to a serial interface or optionally the confit a CAN-Bus (CANopen + SAE J1939). In the configurable 4 - 20 mA interface can be connected. Over a digital alarm output, you will be warned when limits are exceeded or fallen below. Readings can run time-controlled, manually or started and stopped over a digital input. The data can also be stored on the integrated memory unit.
The fluid side, the particle monitor is equipped with two minimizes connections to connect the sensor generally in the off-line circuit to the system. The electrical connection is installed via an 8-pole M12 x 1 circular plug. The integrated data memory allows data recording over a longer period. Besides all its technical functions, the Particle Monitor scores by its compact and optical design.